Detailed Outlines
Course Outliness
Module 1: Implementing Scalable Medium-Sized Networks
- Lesson 1: Troubleshooting VLAN Connectivity
- Lab 1-1: Troubleshooting VLANs and Trunks
- Lesson 2: Building Redundant Switched Topologies
- Lab 1-2: Optimizing STP
- Lesson 3: Improving Redundant Switched Topologies with EtherChannel
- Lab 1-3: Configuring EtherChannel
- Lesson 4: Understanding Layer 3 Redundancy
- Module 2: Troubleshooting Basic Connectivity
- Lesson 1: Troubleshooting IPv4 Network Connectivity
- Lab 2-1: Troubleshooting IP Connectivity
- Lesson 2: Troubleshooting IPv6 Network Connectivity
Module 3: Implementing an EIGRP-Based Solution
- Lesson 1: Implementing EIGRP
- Lab 3-1: Implementing EIGRP
- Lesson 2: Troubleshooting EIGRP
- Lab 3-2: Troubleshooting EIGRP
- Lesson 3: Implementing EIGRP for IPv6
- Lab 3-3: Implementing EIGRP for IPv6
- Lesson 4: Module Summary
- Lesson 5: Module Self-Check
Module 4: Implementing a Scalable, Multi-area Network, OSPF Based Solution
- Lesson 1: OSPF Overview
- Lesson 2: Multiarea OSPF IPv4 Implementation
- Lab 4-1: Configuring Multiarea OSPF
- Lesson 3: Troubleshooting Multiarea OSPF
- Lab 4-2: Troubleshooting Multiarea OSPF
- Lesson 4: Examining OSPFv3
- Lab 4-3: Configuring OSPF for IPv6
- Lesson 5: Module Summary
- Lesson 6: Module Self-Check
Module 5: Wide-Area Networks
- Lesson 1: Understanding WAN Technologies
- Lesson 2: Configuring Serial Encapsulation
- Lab 5-1: Configuring and Troubleshooting a Serial Connection
- Lesson 3: Establishing a WAN Connection Using Frame Relay
- Lab 5-2: Establishing a Frame Relay WAN
- Lesson 4: Introducing VPN Solutions
- Lesson 5: Configuring GRE Tunnels
- Lab 5-3: Establishing a GRE Tunnel
- Lesson 6: Module Summary
- Lesson 7: Module Self-Check
Module 6: Network Device Management
- Lesson 1: Configuring Network Devices to Support Network Management Protocols
- Lab 6-1: SNMP and Syslog Basic Configuration
- Lab 6-2: Analyzing NetFlow Data
- Lesson 2: Managing Cisco Devices
- Lesson 3: Licensing
- Lab 6-3: Managing Cisco Devices and Licensing
Module 7: ICND2 Superlab
Objectives and Pre-requisites
Course Objectives
- Operate a medium-sized LAN with multiple switches, supporting VLANs, trunking, and spanning tree
- Troubleshoot IP connectivity
- Configure and troubleshoot EIGRP in an IPv4 environment, and configure EIGRP for IPv6
- Configure and troubleshoot OSPF in an IPv4 environment, and configure OSPF for IPv6
- Define characteristics, functions, and components of a WAN
- Describe SNMP, syslog, and NetFlow, and manage Cisco device configurations, Cisco IOS images, and licenses
Prerequisites
Before taking Interconnecting Cisco Network Devices Part 2, Version 2.0 (ICND2), students should take:
